Do you have a slippery tub or shower? Chances are you do! Historically, outdated and unreliable slip resistance test methods were used to determine the slipperiness of tubs in the United States, leading to virtually every tub sold being treacherous to use while wet. Slips and falls in tubs and showers often lead to horrible … Continue reading “Slippery Tub Solution”
Blog
What’s the Difference Between the Three ANSI standards for floor slip resistance?
The American National Standards Institute (ANSI) has three pedestrian floor friction standards involving tests using the BOT-3000E digital tribometer, intended for testing flooring for indoor use. Why do they have three standards, and what’s the difference between them? They all have different test methods and different minimum coefficient of friction values (0.42, 0.43, and 0.60). … Continue reading “What’s the Difference Between the Three ANSI standards for floor slip resistance?”
When Should You Test Flooring for Slip Resistance?
Many building owners find themselves in trouble after a refurbishment or new build, because the flooring is unexpectedly slippery when wet. An entrance lobby, restroom, pool deck, spa, or factory floor are common locations where this problem occurs. When should flooring be tested for slip resistance? Some architects might say, “Never.” Many lawyers might say, … Continue reading “When Should You Test Flooring for Slip Resistance?”
Do All Pedestrian Ramps Need the Same Coefficient of Friction?
The minimum safety standard for coefficient of friction for a pedestrian ramp should depend on the angle of the ramp and the weight of the separate load (shopping cart, wheelchair, gurney, etc.), if any, the pedestrian is controlling. However, that’s not how American safety standards are written. In the USA, traditionally safety standards for slip … Continue reading “Do All Pedestrian Ramps Need the Same Coefficient of Friction?”
Slip-and-fall Fraud — Some Clues
How can you avoid slip-and-fall scams on your property? First and foremost, eliminate hazards. The initial step is testing floor slip resistance before a fall is reported. Failing that, pay attention when someone reports a slip, even if it didn’t lead to a fall or injury. That report put you on notice — you can’t … Continue reading “Slip-and-fall Fraud — Some Clues”
Does ANSI Tile Spec A137.1 help protect you from liability for slipping accidents?
If you specify or buy flooring based on a minimum wet dynamic coefficient of friction of 0.42, you may be vulnerable to charges of negligence if a slipping injury occurs on that floor. Here we tell you why, and how to avoid the situation. American National Standards Institute (ANSI) issued its standard A137.1, “Specifications for … Continue reading “Does ANSI Tile Spec A137.1 help protect you from liability for slipping accidents?”
Head Off Litigation with Third-Party Confidential Periodic Floor Slip Resistance Testing
Slips and falls can result from a wide range of causes. To avoid litigation your commercial property needs to be immune to claims that your negligence caused an injury. The most effective way of doing this is to have Safety Direct America periodically slip test your floors for slip resistance, and have your floor care … Continue reading “Head Off Litigation with Third-Party Confidential Periodic Floor Slip Resistance Testing”
Improving the World’s Most Sophisticated Floor Slip-Resistance Safety Standards
In June’s post we discussed situation-specific slip resistance safety standards, which reflect the use or function of a floor and the friction (coefficient of friction) demands placed on it. Many U.S. floor friction standards are “one size fits all” — for instance, a wet dynamic coefficient of friction (DCOF) of 0.43 is considered adequate for … Continue reading “Improving the World’s Most Sophisticated Floor Slip-Resistance Safety Standards”
Three Common Fallacies about Floor Slip Resistance
There are three widely-held misconceptions about pedestrian slip resistance. If you’re aware of them it can help you avoid a nasty, expensive, and possibly life-changing surprise. Fallacy #1: “If a floor has a matte finish — that is, it’s not “shiny” —, it won’t be slippery when wet.” Truth is, many floors that have a matte … Continue reading “Three Common Fallacies about Floor Slip Resistance”
Situation-Specific Floor Slip Resistance Testing Standards
In the USA, pedestrian slip resistance standards for flooring have traditionally been pass-fail. For instance, a coefficient of friction (COF) of 0.60 might be considered “safe” but 0.59 was “not safe.” This applied to any situation provided the floor was level. Recently the American National Standards Institute (ANSI) has published some standards that are a … Continue reading “Situation-Specific Floor Slip Resistance Testing Standards”